Drilling down

The saga of my drill press continues.

For years, I have had a full height drill press – Woodman series, that I purchased pretty early on in the scheme of things, making the best decisions that I could at the time.  That is to say in hindsight, I have been a bit disappointed in it from the start.

I tried many different ways to deal with the shortcomings – different table tops

penturning-23

zshed-4

(the second was very interesting, but WAY too heavy!)

different chucks, but what began the end-game was when one of the capacitors blew.  That was back in May 2014, and somehow I have been dealing without one ever since.

photo-3-05-2014-8-57-02

Can’t exactly remember the timing, but either late last year/earlier this year I finally got around to trying to fix the motor, replacing the failed capacitor with another.  Seemed to work, and a few 5 second runs seemed to show it was back to being functional.  Still, after having it out of action for so long, I’d learned to work without it, so it didn’t get used.

I finally needed to on the weekend – a small hole with a forstner bit.  3/4 of the way down (20mm or so), and the motor on the drill press was smoking more than the workpiece!  Soon thereafter, and the motor ground to a halt, and this time it will be permanent (at least as far as I am concerned).

So it was off to the store once-known as Masters (now in liquidation), and picked up a bench-top drill press a couple of friends have also purchased, and have been pleased with.

drill

Got it for 10% off (liquidator’s price), then an additional 5% with my soon-t0-be defunct Masters trade card.  Cost about $350.

That will keep me going at least until the Nova Voyager drill press is finally available from Teknatool.

Can’t wait!!

Voyager

I don’t think there is any craft or vehicle that captured my imagination more as a child than the Voyager spacecraft.  Launched in 1977, the two identical probes were sent on a journey that to date has taken them 1.97×1010 km away from Earth, past the gas giants of the solar system and then way beyond.

800px-Saturn_(planet)_large

There is a lot of information about them on Wikipedia these days, so if interested you can read up more there.

What I was excited about recently, is that the Voyager probe is one of the models on the Makecnc.com website.  So I made it.

Over 200 individual parts, cut from 3mm MDF, using the 45190 1/16″ router bit from Toolstoday.com (which is still going strong).  Cut on the TorqueCNC.

It took me 2 nights to assemble the model, and a lot of hot glue (which I have been finding to be an excellent way to assemble these models).

I had my friend Kara Rasmanis take a couple of photos of the model, suspended in front of a green screen, and she has then inserted in some royalty-free backgrounds, for a truly stunning result showcasing the model from the front, and back.

Even made from 3mm MDF, it is 900mm across.

FromSpace AboveEarth

For a model, cut from MDF, that is awesome!  Currently sits in my office – when I can part with it, it will be off to my daughter’s school science classroom.

%d bloggers like this: