Work-in-progress Dinosaur #3

Thought I’d post a pic of the dino that I’ve been working on. Currently at the test-assembly stage. You can still see the remains of the pattern from the plans I photocopied, then stuck to the prepared timber. The timber was originally 19mm stock that I resawed on the bandsaw, then ran through the thicknesser until it was the required 6mm thick.

The next step is to sand each part, and glue the sculpture together, followed by a coat of stone-effects paint (for that fossil look).

dino.jpg

It is strange, changing from one bandsaw to another. Wouldn’t have thought I’d notice much difference, and it was subtle, but there. (This is between the Triton 12″, and a Jet 14″, both running a 1/8″ blade). Thinking about it, I’m not sure if one doesn’t have finer teeth than the other, that may make some difference. I don’t think that either stood out as being particularly superior to the other, just that it was a different feel between the two machines.

%d bloggers like this: