Threading Up

Spent the time while watching the Melbourne F1 Grand Prix (well done Daniel!), getting the outlets for the RapidAir (from Professional Woodworkers Supplies) all threaded up, with thread sealant rather than Teflon tape.

Probably the slowest part of the whole install!

20140316-192156.jpg

There are 7 outlets set up identically (capped off rear inlet, front outlet, air inlet at top, drain at bottom), 1 which is for the mezzanine (capped off rear inlet, capped off top inlet, air in from the bottom and front outlet- no drain so lower outlets will have to be the reservoir), and one manifold, with all 4 ports with a hose connector.

20140316-192737.jpg

Next job is to physically mount the outlets in the shed.

Meccano in the Workshop

I was so deprived as a kid, not ever having a meccano set.

20140205-205752.jpg

It is a wonder I managed to get an engineering degree at all.

😉 Now that I have managed to get myself completely disowned 😉 there are still ways we can get to play putting stuff together in many different configurations, easily, while achieving a desired outcome.

There is Ikea for some, but that isn’t particularly useful in a workshop setting.

What we need is a kit, full of all the fittings and items needed to fit out a workshop with something productive and useful. We (at least the majority of us) are not allowed to play with electricity, but there is nothing stopping us playing with compressed air!

Picked up my master kit and extra fittings I needed from Professional Woodworkers Supplies today, and had a bit of a look through all the fitting, bits’n’pieces etc that it comes with.

20140205-211215.jpg

Only real problem I see, is it is going to be a bit too easy to put together, and running a permanent air supply system around the workshop will be a bit too rapid. (See what I did there? It is called RapidAir after all 😉 )

20140205-211454.jpg

The outlets get screwed together- everything into a machined aluminium block. There are taps provided for each outlet to drain condensation out of the lines. The connecting hose fits tool-lessly from point to point, manifold to connector, connector to outlet etc.

20140205-211810.jpg

Extra outlets, connectors, hose are all available as extras, so you can get the main kit, then supplement it as your workshop requires.

Now you can have a compressed air system throughout, with outlets right where you need them.

Who needs meccano play sets, when we can get something like this to ‘play’ with, setting up the workshop!

20140205-212329.jpg

20140205-213636.jpg

%d bloggers like this: