I Wood Like

The guys down at I Wood Like have done a lot of work recently, and have done a complete rebuild of their site.  It looks much like it did before, but has had a significant upgrade, especially around the new online store.

FirefoxScreenSnapz001

For those that don’t know, they are the importer/reseller of the SawStop tablesaw, so I have been working closely with them on the video front, providing footage about the SawStop.

At this stage, they have my video of the assembly of the saw, the video of the saw in use, including the brake, and a short of the blade brake in action.

Upcoming footage on their site includes my video about the guard & riving knife and using the dado blade (and a short video of the same).  The next video after that will be about fitting the genuine SawStop wheel kit, which is a much better solution than the standard machine wheel kit I have been using.

As the I Wood Like site grows, it will be interesting to see their next round of developments.

FirefoxScreenSnapz002

The online store that is now up not only covers the SawStop and the related accessories, but also a range of other machines, including the MiniMax bandsaw, panel saws, combo machines and more.  That includes a range of BSP Blue sawblades.  Not sure what they are like yet, compared to the blades I know, but will be interested to find out, and the SawStop Titanium blades measure up.

FirefoxScreenSnapz003

Will also be interested in seeing how some of the other machines measure up to those we are familiar with.  So many tools, so little time!

Things get worse before they get better

The workshop certainly is an apt demonstration of that point at the moment!

Started off the weekend with the workshop being a little messy, after last week’s rush build to get the magazine articles finished.  Ended the weekend with it looking like a bomb site.

So what went wrong?  Nothing!

It was just time to finish off a job that I started almost two years ago, and has been notably absent from the current workshop: a fully functioning dust extraction system.

For the past 8 months, I have been working with a flexible hose running from the dust extractor, through a door and across the floor to whichever machine I am using at the time (although primarily focused on the jointer and thicknesser, so the other tools have been venting free).

Decided this weekend to do something about recommissioning a fully laid out system, given the machines seem to have migrated to relatively stable positions in the workshop.

Photo 14-09-2014 21 58 38

I’ve had all the odd lengths of pipe, tube, hose and fittings sitting aside from the previous workshop (and the collection above is a small portion of what came out of the previous shop), so that is where I started – working on the complex areas of the dust extraction.  The combined area around the tablesaw, jointer, thicknesser and bandsaw, which are all in close proximity (particularly where the dust ports from each machine are involved).

Photo 14-09-2014 21 57 35 Photo 14-09-2014 21 57 44

It took a bit of trial and error, but I am pleased how it came together.  It is a bit hard to show it looking anything but a mess, but it looks better than the current photos!

One day, I’d be tempted by the metal dust extraction system, but that is an upgrade for the future (if ever).  At the moment, simply having each machine connected to the dust extractor, with blast gates isolating each is the plan.

So far, the bandsaw comes in the bottom (with two hoses, one from the bottom of the bandsaw, and one from just beneath the table), then the tablesaw.  I haven’t worked out how I want to have the tablesaw dust guard connected in yet, but I am still thinking the genuine SawStop solution looks to be an attractive option.

Overarm-dust-collection-TSAODC

There is a port visible that has nothing connected – I have placed a quickconnect port on there, so can easily connect the super-flexible hose with the floor sweeper when I do need additional cleanup.

I have the run overhead towards the dust collector, but that run isn’t finished yet.  I still need to drop it down, past (and pick up) the outlets from the second bandsaw, drum sander and Torque Workcentre.

Photo 14-09-2014 21 57 58

The run continues to the other side of the shed, then drops down to the router table and drill press.  The run then continues (smaller diameter) to the Kapex

Photo 14-09-2014 21 58 09

Still to work out how I am going to pick up an outlet near the lathes, I might have to cut into the run I have just completed by the looks.  Oh well, better done as right as I can.

Some work still to go – another day should knock it off, so long as I have all the parts I need (so better I plan ahead).

 

%d bloggers like this: