Invisible Progress

More progress made today on the kitchen, but not much to actually show for it. A lot of the day was spent doing the same sort of activities as the past few: machining timber to size, joining it up with glue (and Dominos as a whole).

I am still trying to maximise the yield I get from the timber, keeping any offcut of decent width, or length, and surprisingly so much of it is able to be used. I had a whole stack of offcuts, all thicknessed up just in case, and saw they were the perfect size and thickness for the base of the units. What is more, the pile was exactly the right number, and they had already been cut to length, which was exactly the length I needed. I’m sure it isn’t coincidental (being cut from stock that was the right size), but it is cool when it happens in any case.

The tops of the unit are done, excluding the machining (cutting a sink opening, and machining the elements into the stove surface).

Speaking of sinks, I have started preparing the material for the wooden sink.


Sink Laminations

This time I am doing it how I always planned, and envisaged it to be – laminated with contrasting timbers. The light timber is the Tassie Oak, the red timber is Australian Red Gum.


Rudimentary Form

To create the final sink, each lamination needs to be machined before glueup. Way too hard afterwards! So a whole bunch of clamps later (I’m rapidly running out), I managed to get it all glued up, ready for the net stage.

So a day where progress seemed slow to non existent, but it will prove itself during assembly, where all these stacks of dressed timber about the place will transform into the various parts of the project.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: