Honey, I shrunk the kids!

Stu's Shed Pictures

Stu’s Shed Pictures

Bigger is normally regarded as better, and often that is quite a justifiable position.  Larger router bits can handle higher loads, have more chunky carbides, can handle higher feed rates.  But they cannot do everything.

Something I have been struggling with for a while, and especially when working with smaller designs is that the large router bits are, well, too large.  When pattern copying a fine design for example, the large bearing rounds off a lot of the detail.  So it is with definite interest I discovered the miniature router bits from Toolstoday.com.

The bearings are 3/16″ (4.76mm), so it is capable of really getting into tight spaces.  Some other small router bits use a non-bearing pin to achieve this, but this leaves the guide pin rubbing against the workpiece at 20000RPM, the friction of which quickly leads to heat buildup, and burning of the edge.

There are a number of different profiles in the range, so it isn’t just a matter of being able to copy more intricate patterns with a straight bit, but also being able to apply edge treatments in tight spaces. The router bits are 1/4″, so able to fit in standard routers either directly, or with a 1/2″ – 1/4″ collet.

Amana Miniature Router Bits

Flush Trim bit

The flush trim bit is always an integral one for a set – it is particularly potent when used to duplicate a template.  You may choose to use this miniature version in combination with its bigger brother.  The larger one can cut the majority of the outline around the template, then follow up with the miniature one to push right into the detail areas.  Might as well not force the bit to do any more work than necessary!

Rabbet bit

The rabbet bit would be useful in making small boxes, and very small picture frames.

Chamfer bit

The first of the edge treatment bits, the chamfer bit can be used for edging, and producing a miter joint.  The one pictured above produces a 45o chamfer. There is a second one in the range that produces a subtle 7o chamfer.

Round over bit

A couple of different radius round over bits are available.  These are particularly useful in toy making, used to soften edges of toys.

And  the classic profile, the Roman Ogee.

Roman Ogee bit

The profiles may be no different to the other common ones in your router bit set, but the size will make a big difference in what you can achieve, in situations where you would have had to find an alternate (and often with a compromised finish) option.

I know tools are not meant to be ‘cute’, but these miniature bits are, at least as far as any router bit can be!  So if you want to shrink your router bits, you can either get an electromagnetic shrink ray from the ’80s, or get these from Toolstoday.com

Amana Tool Miniature Router Bits

4 Responses

  1. […] And Bump Delve Into Their Social-Mobile Future This Friday At The Facebook Ecosystem CrunchUpStu's Shed var _gaq = [['_setAccount','UA-2176794-1'],['_trackPageLoadTime'],['_trackPageview']];(function() […]

  2. […] Honey, I shrunk the kids! (stusshed.com) […]

  3. […] Honey, I shrunk the kids! (stusshed.com) Share this:MoreLike this:LikeBe the first to like this. […]

  4. […] coped with the idea that some router bits can be cute, and knowing full well some are large and mean looking, I am not sure if I have ever described a […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: