End of Days: The Pandora box is complete

And so we have arrived at the point where the box is revealed as fully formed, closed and opened. Not a pithos as was originally written in Greek by Hesiod in “Works and Days”, but the Latin “pyxis” as the original myth was mistranslated back in the 16th century.

Trays lined with felt

I had to be really patient to get to this point – lining a box (when it is done) really shows the box and how it will finally look, and this was no exception.  The bottom and inside of the main box was lined in black (as a point of difference from the ‘working’ surfaces.  I didn’t need to do the inside, but it gives a sense of completeness if both trays are ever lifted out.  Getting the lower tray out is tricky in any case – there is a bit of a vacuum effect there (not a lot, but enough to be noticeable – the benefit of a close fit).

I chose a royal blue for the two trays – giving consideration to how the jewellery will stand out on such a colour.

Dividers in place

Next, the dividers were added.  These are only a friction fit – they are not glued in.

Trays in location

Coming together.  the upper tray slides back and forth revealing the lower compartments.   It can also be easily lifted out as required.

Lid attached, and charms, bracelets and necklace added

Finally, the lid has the hinges added, and they all slide together.  Getting the hinges into the lid was a bit nerve-wracking.  It is burl after all – not the strongest of materials, and each hinge had to be carefully tapped into location.  Once all three were attached, the hinges were lined up with the holes in the box, and carefully pushed together.

It is shown here without a lid restraint  that I have since added (to stop the lid being opened too far), using a black leather cord and some fittings from jewellery-making added so it can be screwed to a small hole drilled into the top and the side wall of the box (inside).

Concealed hinge detail

Bit of a closeup of the hinges in action.  They are not the strongest hinge, but are very clever in mechanism, and fully concealed when the lid is closed.

Lid detail

A bit of a closeup of the lid beading.  Making it out of the same timber as the top worked out really well, and it has machined nicely on the router table.  The slight apparent overhang of the mitre joint is actually an illusion – it isn’t there to see or feel in reality- trick of light, or shadow.  Beautiful features in the timber – burls can be really stunning.

So finally, the last one – the completed box.  Probably should have taken another from the side – may post it here later.

Completed Pandora Box

I’m certainly happy with how it has come out, and surprisingly, the recipient didn’t have a clue.  I thought I was gone for all money, that she suspected I was up to something, but I got away with this being a complete surprise.  The best kind!

 

 

%d bloggers like this: