To everything, turn, turn, turn, there is a season……

You are deep into a sharpening session on your water-cooled sharpener, and the next job would be best done with the wheel turning towards the edge, rather than away from it. What do you do? What DO you do? I know what I do – compromise! I know the T7 (in my case) weights 14kg, plus around 3kg in water (the wheel soaks up about 2kg, and there is an additional in the waterbath). I could pick it up and spin it around, then back again for each job, but I don’t.

And I am not the only one. In fact, it must be rather common as Tormek have come up with the RB-180. A rotating base for their sharpeners.

RB-180 from Tormek

It is specifically designed for the Tormek footprint, and has rubber feet so the complete unit doesn’t start slipping around on the bench. I have found there can be a little movement between the sharpener and the rotating base. I may put down something a bit more anti-slip, but I didn’t notice it causing me a problem during my first sharpening session since putting the new base under my sharpener.

The rotating base has a very low profile – particularly important for those people who have already taken the time to ensure their sharpeners are set at the optimum height.

Underside

Looking at the underside for a sec, and you see those rubber feet, and the lock for the rotation. Also the cross reinforcing to provide stiffness.

Fitting Simplicity

Fitting the base is just a bit easy – pick up sharpener, put down the RB-180 (with the lock facing the front), place the sharpener on top. Done deed.

Simple push down on the locking lever, and spin the Tormek around.

Turning

Turning…

Done

So a useful addition, particularly for the 17kg (wet weight) Tormek T7. It has been a while since I’ve seen this side of the sharpener – looks like it is due for some dusting!

I took the splash guard off for this, as where I have the T7 there isn’t a lot of room, and therefore even more reason for the new base. Check out http://www.promac.com.au for more information and to find an authorised dealer near you.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: