Metric Wooden Hinges

Heard a rumour recently (actually more than a rumour – if it happens to be dropped into conversation by Professional Woodworkers Supplies, then it is a fait accompli), that along with the recent release by Incra of their top-line products with a metric version, the HingeCrafter is also going to have a metric version.

The only holdup now for it to make the market, is waiting for the metric Whiteside router bits to be developed.  So good news for those who want, or have a metric Incra LS Positioner, and want to be be able to use it in conjunction with the HingeCrafter to make a stylish wooden hinges for their project.

Class

The hinges can then be made in the same timber as the project (or contrasting as a feature), and really look to lift a project to another level.  Imagine getting a stylish dovetailed box with a hinged lid, and how it would look if the hinges were brass compared with wood.  The whole project goes from “wow”, to “WOW”.

Contrary to what you might expect, the HingeCrafter is not actually used to form the hinge knuckles.  That is achieved on the router table, with the Whiteside router bits and the LS Positioner.  The HingeCrafter is used to bore the hole for the hinge pin.  It is both important that the hinge pin is perfectly straight (so the hinge operates smoothly without binding), and that no breakout occurs as the hole is being drilled (let alone having too much side pressure causing weaker timbers to have knuckles break off altogether).

HingeCrafter

With the included drill bit (and assuming the metric will be the same as the imperial), hinges over 10″ long are possible (254mm in metric).

Manufacturing Steps

Hinges

Any sizes you want (length of bit depending – the hinge can be up to twice as long as the available bit), and 4 different diameter hinges.  Made in your timber of choice, either matching the project, contrasting with it, or both!  And no more of those brass screws who’s heads seen designed to shear and pop off at a moment’s notice.

%d bloggers like this: