Oneida 1, Stu’s Shed 0

Gave a real crack at sorting out the Systainer version of the Dust Deputy, making up a strong box to go inside the Systainer, all Dominoed together (used the Domino with the Cleantex for the first time……nice!) and slots cut to match the inside of the Systainer using the router table in its new configuration which also worked very nicely.

Tried it out again, and with all the additions, still very little dust was collected, the majority passing through to the vacuum bag.

Inner Skin

So with such an unexpected failure of the concept, I wondered if it was just the Festool Cleantex that was too powerful for the size of the cyclone.  I then tried the unit using the Shopvac, which has been very successful in the past, and although the collection was improved, still no decent result.  I can only suspect now that the shape of the collection container plays more of a part than I first suspected.  I may play again another day, but at this stage I couldn’t be bothered wasting any more time on the development.

So I reverted the cyclone to its original (commercial) orientation and tried the Cleantex again.

Big dust pile test

The Cleantex certainly has a fair suck on it – the problem I have highlighted in the past about the original lid of the Dust Deputy bin not being strong enough was significantly exaggerated – the lid getting badly sucked in (but still maintaining a seal)

At the end of a dust mountain (about 1/2 the dust drum), I checked the Cyclone bin, as well as the Cleantex dust bag.

Cyclone bin – nicely full, Cleantex bag – nicely empty.

Suck results - full bin, empty bag

So reverted everything back to pre-mod orientation – the Cooltainer back to being a Cooltainer, the Cyclone back to original, and the other Systainer put back together.  It still has a hole in the lid, and I still like the idea of a cyclone that fits on top of the Cleantex.

So I took the second dust bin of the Dust Deputy, and screwed it straight to the top of the spare (and somewhat aerated) Systainer.  Now I do need a longer initial hose, but the concept is there, just not as elegant as I intended. (Bugger).

A version of my vision

%d bloggers like this: