Bits n Pieces around the shed

Think I have found a good location in the shed for the drum sander.  It may not be the perfect solution for the machine in every workshop, but how I use the machine, this solution works for me, and saves the machine footprint as well.

Drum Sander & Thicknesser

Drum Sander & Thicknesser

This solution works on a number of levels.  Because my thicknesser has a fixed head, there is no load on the height mechanism having the sander on top, and the thicknesser is certainly strong enough to cope with this load.  It doesn’t interfere with any of the thicknesser mechanisms, and it means I use the same infeed and outfeed areas for two machines with similar requirements.

I’ve also been playing with the drill press, trying out different tabletop combinations.  This current look isn’t working too well – it weights way too much to be functional, so I imagine I will be restoring the Pro Drill Press table shortly.  Just wanted to give this a try anyway.

Trying a CI Drill Press Tabletop

Trying a CI Drill Press Tabletop

My ideal would be a CI top with the features and sizing of the Pro Drill Press Table.

It took me a long time to get around to it, but I’ve finally found a home for the Incra Mitre Express, and the coving jig.

Jig Storage

Jig Storage

I did drill a couple of holes in the mitre express to allow it to be hung.  So much better than having it kick around the shed floor.

I had a chance to have a quick look at the panel clamps I’m reviewing for the Australian Wood Review Article.  Clamping them overhead wasn’t really the plan, but once I started, I just kept going!

Some Panel Clamps

Some Panel Clamps

CompressX Panel Clamp

CompressX Panel Clamp

Not every clamp was able to clamp overhead of course!

Still hoping to have Frontline Engineering’s version included.  I’ve managed to get a bit of an extension on the article deadline, so that should help. Aussie products always especially welcome!

%d bloggers like this: