Cool Tools & Triton

The Cool Tools show on pay-TV got mentioned here recently for their MagSwitch feature. I was watching the show tonight, and the first tool out of the blocks was the Triton MOF001.

Sad- it still looks good.

Speaking of Cool Tools, Worx also made an appearance with a new circular saw- the bladerunner. Worx/Rockwell really seem to be filling the old Triton niche.

Scavenging from the Firewood Pile

This is a mini project in reclaiming timber, destined for the chimney.

It is rapidly approaching winter here down-under, and having a fire in the evenings is becoming commonplace.  I always wonder just what is being turned to ash, and if it could be redirected to more aesthetic purposes (not that staring into a fire in the hearth doesn’t have its own appeal).

This block of redgum seemed more interesting than some, so I thought I’d just see what I could find inside, and if nothing, nothing lost (even the sawdust gets used!).

Redgum Firewood

Redgum Firewood

The first step was running it through the bandsaw.  Given the thickness of the block, I fitted a 1.3 TPI 3/4″ ripping blade, which made short work of the task.  You can just see a short section of the blade behind the block in this next photo.

Creating Sawdust

Creating Sawdust

I slabbed the block in pretty thick sections, so I had plenty of material to work with when machining the boards flat, while still maintaining a reasonable material thickness.

As-cut boards

As-cut boards

So here are the resulting boards, still chunky and rough.  The next job will be to start running them through my stock preparation machines (the jointer/planer, thicknesser (although they are pretty short for that), and the drum sander (with some 60 grit attached).

The plan is, if I can get 4 reasonable boards from this, to then produce a dovetailed box and finish it, so it will be an interesting evolution.  If it all goes pear shaped, then I’m sure the fireplace will make short work of it!

%d bloggers like this: