Linbide Flush Trim Panel Bit

The Router bit-of-the-Month is the Linbide Flush Trim Panel Bit, with twin flutes and interchangeable cutters.

The bit is 1/2″ shank, 19mm diameter and 63mm cutter length.

Linbide Flush Trim Panel Bit

Linbide Flush Trim Panel Bit

This bit is certainly a significant step up from previous flush-trim bits I have used in the past.  It has a twin bearing at the top, which gives a large contact area which is an asset when using a material like MDF as a pattern to follow.  MDF is a great pattern-making material, but it can be compressed slightly if overloaded, causing the bearing to imprint into the surface, resulting in a (very slight) change in size between the template and the resulting object.  Normally not an issue, but sometimes you want it to be exact, and having two bearings to spread the load is an advantage.

There is also an additional, thin bearing at the bottom of the bit, so this is unusual in having one at either end, and makes the bit a lot more versatile for different trimming situations.  It does mean the bit cannot do a plunge into material for internal pattern-following, but it is easy to predrill a starting hole when required.  The bit is not designed to scoop material out of an area where it is not going the full material depth (such as box making), but that is a job for a different router bit – horses for courses.

The other, very noticeable aspect of this router bit is the interchangeable (and reversable) cutters.

Linbide Flush Trim Panel Bit

Linbide Flush Trim Panel Bit

With a concept very similar (if not identical) to many planer blades, when the cutters become blunt / worn / chipped, they can be removed and reversed, exposing a new cutting edge.  Once the second edge is gone, new (tungsten carbide) cutters can be purchased surprisingly cheaply, so there is no need to go down the path of resharpening (and the resulting reduction in cutter diameter).  For a business situation these are ideal to have the machine staying in production for the maximum amount of time.

These bits are often using in a production workshop setting permanently mounted on a router table off to one side so they are ready to go at any time to do a quick trimming job etc.

I’m also seriously considering how I can incorporate the same concept into my workshop, with a second router mounted beneath a router wing on the tablesaw, so it would be ready to go at a moment’s notice, rather than even having to change router bits etc on the main router table.  It doesn’t even need to have a fence, as pattern following only needs a starting pin to rest the work on before engaging the cutter.

4 Responses

  1. Hi Stuart , I am wrapped in the Linbide Flush Panel Bit , on their web site they do not show that triple bearing bit , and the number is hidden by the bit in the photo.Can you give me the number , and can I purchase it from Mitre 10 ? I enjoy your shows in the shed , great tips & products . It would be good if Triton went away from Chinese production , for the sake of quality .
    Regards Frank .

  2. Hi Frank,
    Will get the number for you when I get home – both photos I have of it also have the number covered!

    I doubt if Mitre 10 will be able to source it – Linbide are imported by The Woodworking Warehouse (links to their site on the Sources page).

    I gather this bit is very new, and I’m not sure of its availability or price yet.

    I’m making some modifications to the shop just to incorporate the concept behind this bit – having it permanently mounted, ready to be used. Will be documenting it as soon as the parts I need become available.

  3. […] of the failures was actually the router bit of the month back in November last year – the Linbide Flush Trim Bit.  I cannot seem to use this bit without some colossal grabs, and kickbacks, and I’m starting […]

  4. […] Comments Productive Days … on Linbide Flush Trim Panel …HJ on Episode 49 Kreg Pockethole Dri…Craig on Safety Week 2009Alex kara on Safety […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: