The Quest for Accuracy

I’m not sure what it is that is driving me to seek ever increasing degrees of accuracy in my tools. Is it because I need everything to work perfectly to counteract my lack of skill and/or practice? Is it because I’m an engineer (in mind if not by vocation)? Or do I secretly wish I was working with steel rather than wood? Perhaps I’m just a bit AR (and if you don’t know what the acronym is – Google it…..add “freud” (no, not the blade!!))

Irrespective of the cause, I do like accurate tools, and gauges etc. I’ll do a full expose’ in an upcoming video, but have thrown a few things together here:

Precision Measuring Tools

From the left side, heading clockwise, is a digital protractor (accurate to 1/10 degree), digital angle gauge (also 1/10 degree), the Woodpeckers Saw Gauge (accurate to 1/1000″, or 0.02mm), a digital height gauge (0.1mm), Incra rule (0.1mm), and Incra square. In addition, there is the Wixey Digital Fence Gauge, and of course the tablesaw itself is part of the picture (figuratively and literally), and that is also deliberate. No point having accurate measurements if the tools themselves are not part of the equation.

One Response

  1. I have just recently bought an equivalent tool to the angle finder (the Carbatec one) for use on my WC2000 in cross cut mode. the accuracy is outstanding!

    I set the bevel angle I want using the main dial, zero the angle finder on the table then clip is to the blade. it’s usually within 1 deg. It’s then a 1 minute job to use the micro adjust to get the angle spot on. Money very well spent.

    cheers,
    Dave

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: