Unorthodox Triton Router Table Mod Part 2 (Accessories)

With the table upgrade, the table accessories also need to be adjusted to cope with the additional 3mm extra table height. This is achieved easily by adding shims made out of the offcuts from the aluminium of the new top.

Triton Finger Jointer
The finger jointer is the hardest, only because of the amount of dismantling required.
The sliding plate is removed to give access to the hold-down hardware.

Photo 1 – Removing the Finger Jointer Plate

Next, the hardware that holds the finger jointer down is removed.

Photo 2 – Removing the hardware

New shims are cut, and holes drilled in each.

Photo 3 – Preparing the new shims