Burl Clock

After having a couple of inquiries, thought I’d post a brief description of the Burl Clock, seen in the Gallery.

clock.jpg

The burl (and clock mechanism) were purchased at the Working with Wood show. Total cost: $40.  The mechanism came from Jonathon Knowles Clocks.

The face has been planed and sanded to get it reasonably flat, then the sanding to produce the finish. Each sandpaper grade was used, between 120 and 1200, all on a Triton Random Orbital sander.  The ROS is used because its eccentric sanding pattern doesn’t leave the telltale swirls (scratches) of a normal orbital sander.

The finish was produced first by rubbing Ubeaut Shellawax Cream across the face until the cloth started to grab. It was then buffed with a Ubeaut Swansdown mop attached to a drill. Next, Ubeaut EEE Ultrashine was used to produce a satin finish, again with the Swansdown mop.

The cavity for the clock mechanism was made using the Triton Router (handheld), using a template guide and straight router bit.

%d bloggers like this: