Tool of-the-Month (February 08)

The tool for this month is the Veritas MkII Honing Guide. Veritas are well known for producing quality jigs and tools, and the MkII Honing Guide is no exception.

pict6155.jpg

The MkII is a significant development on the original jig and although it has been available for a while now, it still justifies being highlighted. It is used in setting and maintaining the bevel angle for edge cutting tools (such as chisels and plane blades).

It consists of 2 main components – the black component is the blade holder, and once the blade position is set, holds it in that position during the grinding/honing process. The other component (silver) (the registration jig) is used to set the blade position so it is honed to the correct angle. Once the blade position is set, this component is removed.

There are a number of advantages of the MkII. First and foremost is the accuracy and repeatability of setting the honing angle. The guide can be used on waterstones, oilstones, diamond stones, and sandpaper (commonly called the “Scary Sharp” technique). It has a large brass eccentric roller which can be set to a secondary position for creating a microbevel.

The setting jig not only controls the amount of protrusion of the blade (ie distance from the roller, which dictates the angle of the bevel), but also keeps the blade square so that an undesired skew is not created.

pict6156.jpg

Here you can see the stop which is dictating the blade protrusion, but also the far side has a fence which the blade is resting against, ensuring that it is square to the roller. The blade in this case is one of my HNT Gordon plane blades (which as you might be able to see, already has a mirror finish).

pict6157.jpg

Once the blade position is set, the registration jig is removed, and you are ready to start honing the blade. I’m going to be doing a separate article/video on various sharpening techniques in the near future, so won’t go into details here.

More recently, extra jigs and modifications have become available for the MkII guide, including a Skew Registration Jig for deliberately (accurately and repeatably) setting a skew angle if so desired.

pict6154.jpg

The Veritas MkII Honing Guide and Skew Registration Jig has been supplied by Carbatec, and continues to prove to be their most popular honing guide.  I’ve had my MkII Guide for quite a while now, and it has proven to be an invaluable tool where it comes to sharpening.  I had the MkI before it, and although it was a good jig, the MkII has proven to be exceptional, and I’ve never regretted upgrading.

%d bloggers like this: