Work-in-progress Dinosaur #3

Thought I’d post a pic of the dino that I’ve been working on. Currently at the test-assembly stage. You can still see the remains of the pattern from the plans I photocopied, then stuck to the prepared timber. The timber was originally 19mm stock that I resawed on the bandsaw, then ran through the thicknesser until it was the required 6mm thick.

The next step is to sand each part, and glue the sculpture together, followed by a coat of stone-effects paint (for that fossil look).

dino.jpg

It is strange, changing from one bandsaw to another. Wouldn’t have thought I’d notice much difference, and it was subtle, but there. (This is between the Triton 12″, and a Jet 14″, both running a 1/8″ blade). Thinking about it, I’m not sure if one doesn’t have finer teeth than the other, that may make some difference. I don’t think that either stood out as being particularly superior to the other, just that it was a different feel between the two machines.

2 Responses

  1. Like your dino. What other things do you make woth a scrollsaw?

  2. In fact, I use a bandsaw for 90% of the work here – much smoother operation than the reciprocal nature of the scrollsaw.

    I’m know there are heaps of things that can be done with a scrollsaw, I just haven’t had time to really explore this tool fully.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: